DIRECTV AT&T 4-DSWM SWM Expander Module (SWM-EXPNDR-P-R0-09)

Description

SWM Expander holds up to four DSWM-30 modules and has six satellite inputs. This model also has two power inputs (from PI-29Z), four power outputs (to DSWM-30), and four ground lugs. The expander is wall mountable and for indoor use only, external polarity locker is required. Any unused ports are auto-terminated. This product requires 1 PI-29Z power supply for every two modules and will not power the LNB.
Holds Up To 4 DSWM-30
Six Satellite Inputs
Two Power Inputs
Four Power Outputs
Wall Mountable
For Indoor Use
Four Ground Legs
Features:
• Holds up to 4 DSWM-30
• Six Satellite Inputs
• Two power inputs (from PI-29Z)
• Four power outputs (to DSWM-30)
• Four ground lugs
• Wall mountable
• Unused ports are auto terminated
• Requires 1 PI-29Z power supply for every two modules
• Will not power the LNB, external polarity locker is required
• Not compatible with legacy SWM­8/16/32 units
• For indoor use
Impedance:
Frequency Range:
Insertion Loss:
Number of Input Ports:
Port to Port Isolation, Input to Output: Return Loss On All Ports:
DC Voltage at the 2 DC Inputs: DC Internal Power Consumption: DC Voltage at the 6 RF Inputs: Environmental Requirements: Dimensions:
Ground Lugs
Mounting Tabs
Power to SWM 3 Power to SWM 4
DC Power In from PI-29Z 2
75 Ohm
250 - 2150 Mhz
<12 dB
6 satellite ports
>35 dB
12.0 dB, 250-750 MHz, 950-1450 MHz and 1650-2150 MHz
29VDC
<3 Watts
0 Volts
Indoor or Lock Box Installation
5.8 x 7.1 x 3.1”
Four, One at each corner of the housing Four, One at each corner of the housing