Snow Performance Holley High Ram Plenum Plate Direct Port Water Methanol System

Description

Snow Performance Holley High Ram Plenum Plate Direct Port Water Methanol System
Snow Performance Holley High Ram Plenum Plate Direct Port Water Methanol System
Snow Performance Holley Hi-Ram Plenum Plate Direct Port Water Methanol System With VC-50 Controller
Unlock 50-70 HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2.5 Boost Cooler water-methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged). The Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Especially helpful for direct-injected engines to remove 100% of carbon build-up on the valves. Recommended for all street/strip driven forced induction vehicles using a turbo or centrifugal supercharger (Procharger/Vortech) looking for cooling over a wide range.
The VC-50 (ISO 9001 Manufactured) controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors!
This kit utilizes the only OEM-approved water-methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump "sleeve". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decreasing pump life. The Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak-free operation even when using 100% methanol. Whether running a supercharger, turbo, or high compression motor the Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time!
Features:
U.S.A. Made
Adjustable Progressive Water-Methanol Engagement & Monitoring
Digital Boost Reading (1-50 PSI)
Recommended For Street Driven Turbo and Centrifugal Supercharger Applications
Supports 1,000+ HP
100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
Snow Performance Hyper-Sonic Water-Methanol Nozzles (8 x #2 nozzles)
Snow Performance ACU-SEAL Water-Methanol Compression Fittings
Snow Performance OEM Approved Extreme Environment 300 PSI UHO Water Methanol Pump
Snow Performance Running "S" Engraved Low Profile Nozzle Holder
Snow Performance Running "S" Engraved Low Profile High Flow Check Valve
Snow Performance Solenoids
Stainless hardlines pre-plumbed on plate
Terms and Conditions
Shipping
Returns
- Pictures are for display purposes only and may not be application-specific. Manufacturers often makes updates to products and/or packaging without notifying resellers. While we have made every effort to have the most up-to-date product pictures, sometimes you may receive a product or manufacturer packaging that is different than the one shown in the listing.
- All products shown are designed for USDM (United States Domestic Market) applications. We cannot confirm fitment for any vehicle outside of the United States; it is buyer's responsibility to ensure fitment on their particular application.
- We strive for 100% satisfaction and positive feedback. Please contact us prior to leaving negative or neutral feedback if we did not meet your expectations.
- We have multiple warehouses. Our main shipping warehouse is in Arizona and we have three other warehouses in Nevada, Texas, and Pennsylvania. The item(s) will ship to you from whichever warehouse is closest to you that has the item in stock at the time of order. Do not assume that your order will ship from our Arizona warehouse. Some orders may also have to be split up into separate shipments from different warehouses. All of these things can affect your total delivery time. If your order is time-sensitive please contact us prior to ordering to make sure we can meet your deadline with the shipping option that you select.
- We use UPS, FedEx, and OnTrac exclusively. All international orders are fulfilled through Ebay Global Shipping Progam. No PO Box, AFO/PFO mailboxes, etc. No exceptions.
- Orders cannot be shipped to any location other than the address selected at checkout (see eBay seller protection policies). If order cannot be fulfilled and/or shipped to your address due to stock-out, ineligible address, or any other reason, order will be cancelled and you will be notified within 24 hours of purchase.
- Customers must adhere to Ebay return policy guidelines. No returns on opened items; items must be in new, unused and re-sellable condition. Do not write on or de-face manufacturer packaging.
- No substitutions, and orders cannot be cancelled or changed once payment is made. Please send any messages before placing order if you have any questions. If you have made a mistake in your order, it will need to be returned for refund.
Listing and template services provided by inkFrog